Filter
Top Products
System Clock Commands
7-29
sntp-server ip
This command sets the IP address of the servers to which SNTP
time requests are issued. Use the this command with no
arguments to clear all time servers from the current list.
Syntax
sntp-server ip <1 | 2> <ip>
• 1 - First time server.
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server
enable command, the sntp-server ip command specifies the
time servers from which the wireless bridge polls for time
updates. The wireless bridge will poll the time servers in the
order specified until a response is received.
Example
Related Commands
sntp-server enable (page 7-30)
show sntp (page 7-33)
AP(config)#sntp-server ip 10.1.0.19
AP#