Filter
Top Products
Bridge Commands
7-65
Bridge Commands
The commands described in this section are used to set the MAC
address table aging time and spanning tree parameters for both
the Ethernet and wireless interfaces.
Command Function Mode Page
bridge timeout Sets the aging time for the address
table
GC 7-66
bridge stp-bridge
spanning-tree
Enables the spanning tree protocol
for the bridge
GC 7-66
bridge stp-bridge
forward-time
Configures the spanning tree
bridge forward time
GC 7-67
bridge stp-bridge
hello-time
Configures the spanning tree
bridge hello time
GC 7-68
bridge stp-bridge
max-age
Configures the spanning tree
bridge maximum age
GC 7-69
bridge stp-bridge
priority
Configures the spanning tree
bridge priority
GC 7-70
bridge stp-port
path-cost
Configures the spanning tree path
cost of a port
GC 7-71
bridge stp-port
priority
Configures the spanning tree
priority of a port
GC 7-72
bridge stp-port
portfast
Sets a port to fast forwarding GC 7-73
bridge stp-port
spanning-disabled
Disables the spanning tree protocol
on a port
GC 7-74
show bridge Displays the current aging time
settings
Exec 7-75