Filter
Top Products
System Configuration
6-78
show interface wireless a or show interface wireless g
command.
Note: The index and length values used in the key command must be
the same values used in the encryption and transmit-key
commands.
AP(config)#interface wireless g 7-99
Enter Wireless configuration commands, one per line.
AP(if-wireless g)#authentication shared 7-109
AP(if-wireless g)#encryption 128 7-110
AP(if-wireless g)#multicast-cipher wep 7-114
AP(if-wireless g)#key 1 128 ascii abcdeabcdeabc 7-112
AP(if-wireless g)#transmit-key 1 7-113
AP(if-wireless g)#end
AP(config)#no 802.1X 7-51
AP(config)#end
AP#show interface wireless g 7-120
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11g WIreless Outdoor
Bridge/AP
Service Type : Access Point
SSID : DualBandOutdoor
Channel : 5 (AUTO)
Status : Disable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (20 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
Maximum Association : 64 stations
----------------Security-----------------------------------
Closed System : DISABLED
Multicast cipher : WEP
Unicast cipher : TKIP
WPA clients : SUPPORTED
WPA Key Mgmt Mode : DYNAMIC
WPA PSK Key Type : HEX
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 1
Static Keys :
Key 1: ***** Key 2: EMPTY Key 3: EMPTY Key 4: EMPTY
Authentication Type : SHARED
===========================================================
AP#