SMC Networks 2.4GHz/5GHz Network Router User Manual


 
PPPoE Commands
7-87
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
If the pppoe ip allocation mode is set to static, the remote IP
address must be entered with this command, and the local IP
address must be entered with the pppoe local ip command.
Example
Related Commands
pppoe ip allocation mode (page 7-82)
pppoe local ip (page 7-86)
pppoe username
This command sets the user name for the PPPoE tunnel.
Syntax
pppoe username <username>
username - User name assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
AP#(if-ethernet)#pppoe remote ip 192.168.1.20
AP#