SMC Networks 2.4GHz/5GHz Network Router User Manual


 
Flash/File Commands
7-39
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Flash/File Commands
These commands are used to manage the system code or
configuration files.
AP#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
AP#
Command Function Mode Page
bootfile Specifies the file or image used to start
up the system
Exec 7-40
copy Copies a code image or configuration
between flash memory and a FTP/TFTP
server
Exec 7-41
delete Deletes a file or code image Exec 7-42
dir Displays a list of files in flash memory Exec 7-43