![](http://pdfasset.owneriq.net/1/e8/1e8791db-9bd4-4ad5-8c8e-bcc1ff96f368/1e8791db-9bd4-4ad5-8c8e-bcc1ff96f368-bg49.png)
Using the Web-based Management Setup Wizard
5-9
4. WDS – To set up a wireless bridge link, you must configure
the WDS forwarding table by specifying the Ethernet MAC
address of the bridge to which you want to forward traffic. For
a Slave bridge unit, you need to specify the MAC address of
the wireless bridge unit at the opposite end of the link. For a
Master bridge unit, you need to specify the MAC addresses of
all the Slave bridge units in the network.