SMC Networks 2.4GHz/5GHz Network Router User Manual


 
C
OMPLIANCES
v
This device employs a radar detection feature required for European Community
operation in the 5 GHz band. This feature is automatically enabled when the
country of operation is correctly configured for any European Community
country. The presence of nearby radar operation may result in temporary
interruption of operation of this device. The radar detection feature will
automatically restart operation on a channel free of radar.
The 5 GHz Turbo Mode feature is not allowed for operation in any European
Community country. The current setting for this feature is found in the 5 GHz
802.11a Radio Settings Window as described in the user guide.
The 5 GHz radio's Auto Channel Select setting described in the user guide must
always remain enabled to ensure that automatic 5 GHz channel selection
complies with European requirements. The current setting for this feature is
found in the 5 GHz 802.11a Radio Settings Window as described in the user
guide.
This device is restricted to indoor use when operated in the European
Community using the 5.15 - 5.35 GHz band: Channels 36, 40, 44, 48, 52, 56, 60,
64. See table below for allowed 5 GHz channels by country.
This device may be operated indoors or outdoors in all countries of the European
Community using the 2.4 GHz band: Channels 1 - 13, except where noted
below.
- In Italy the end-user must apply for a license from the national spectrum
authority to operate this device outdoors.
- In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz
band: Channel 13.
- In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band:
Channels 1 - 7