Filter
Top Products
Command Line Interface
7-92
Example
To specify the 10/100Base-TX network interface, enter the
following command:
dns server
This command specifies the address for the primary or secondary
domain name server to be used for name-to-address resolution.
Syntax
dns primary-server <server-address>
dns secondary-server <server-address>
• primary-server - Primary server used for name resolution.
• secondary-server - Secondary server used for name
resolution.
• server-address - IP address of domain-name server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
The primary and secondary name servers are queried in
sequence.
Example
This example specifies two domain-name servers.
AP(config)#interface ethernet
AP(if-ethernet)#
AP(if-ethernet)#dns primary-server 192.168.1.55
AP(if-ethernet)#dns secondary-server 10.1.0.55
AP(if-ethernet)#