Filter
Top Products
Chapter 8 Configuring Network Interfaces and the Boot Device 151
If you want to specify a network interface other than an on-board Ethernet interface
as the default boot device, you can determine the full path name of each interface by
typing:
The show-devs command lists the system devices and displays the full path name
of each PCI device.
What Next
For more information about using the OpenBoot firmware, see:
■ OpenBoot 4.x Command Reference Manual, included with the Solaris Software
Supplement CD that ships with Solaris software. This manual is also is available
at the Web site http://docs.sun.com under Solaris on Sun Hardware.
ok show-devs