Filter
Top Products
224 Sun Fire V490 Server Administration Guide • August 2004
The following caution applies only to devices with a Standby power switch:
Lithium Battery
System Unit Access Panels
You must remove the access panels of your Sun Fire V490 Server to add cards or memory. Be sure to replace and
secure the access panels before powering on your system.
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily accessible.
Do not connect the power cord when the
power supply has been removed from the
system chassis.
Caution – The Sun Fire V490 Server system
PCI riser board and SC card contain lithium
batteries. Batteries are not customer
replaceable parts. They may explode if
mishandled. Do not dispose of the battery in
fire. Do not disassemble it or attempt to
recharge it.
Caution – Do not operate your system while
the access panels are removed. Failure to take
this precaution may result in personal injury
and system damage.