Filter
Top Products
192 Sun Fire V490 Server Administration Guide • August 2004
f. Near the end of the script, you need to provide an RSC password:
The RSC firmware on the Sun Fire V490 system is configured. Perform the following
steps on the monitoring system.
3. From the monitoring Sun computer or PC, start the RSC GUI.
Do one of the following.
■ If you are accessing the RSC GUI from a Sun computer, type:
■ If you are accessing the RSC GUI from a PC, do one of the following:
■ Double-click the Sun Remote System Controller desktop icon (if installed).
■ From the Start menu, choose Programs and then Sun Remote System
Controller
(if installed).
■ Double-click the RSC icon in the folder where RSC was installed. The default
path is:
C:\Program Files\Sun Microsystems\Remote System Control
A login screen appears prompting you to enter the IP address (or hostname) of the
RSC card, as well as the RSC user name and password that you set up during the
configuration process.
Setting User Password Now ...
Password:
Re-enter Password:
# /opt/rsc/bin/rsc