Sun Microsystems V490 Server User Manual


 
Chapter 12 Exercising the System 205
6. (Optional) Select the tests you want to run.
Certain tests are enabled by default, and you can choose to accept these.
Alternatively, you can enable and disable individual tests or blocks of tests by
clicking the checkbox next to the test name or test category name. Tests are enabled
when checked, and disabled when not checked.
TABLE 12-1 lists tests that are especially useful to run on a Sun Fire V490 server.
Note TABLE 12-1 lists FRUs in order of the likelihood they caused the test to fail.
7. (Optional) Customize individual tests.
You can customize individual tests by right-clicking on the name of the test. For
instance, in the illustration under Step 5, right-clicking on the text string
ce0(nettest) brings up a menu that lets you configure this Ethernet test.
TABLE 12-1 Useful SunVTS Tests to Run on a Sun Fire V490 Server
SunVTS Tests FRUs Exercised by Tests
cmttest, cputest, fputest, iutest,
l1dcachetest
indirectly: l2cachetest, l2sramtest,
mpconstest, mptest, systest
CPU/Memory board, centerplane
vmemtest, pmemtest, ramtest Memory modules, CPU/Memory board,
centerplane
disktest, qlctest Disks, cables, FC-AL backplane
nettest, netlbtest Network interface, network cable, centerplane
env5test, i2ctest Power supplies, fan tray, LEDs, centerplane
sptest Centerplane
ssptest SC card
usbkbtest, disktest USB devices, centerplane
dvdtest, cdtest DVD device