Filter
Top Products
196 Sun Fire V490 Server Administration Guide • August 2004
c. Click the other Environmental Status window tabs to see additional data.
8. Access the Sun Fire V490 server’s system console from RSC software.
To do this:
a. Find the navigation panel at the left side of the RSC GUI.
b. Click the Open Console item under Server Status and Control.
A Console window appears.
c. From the Console window, press the Return key to reach the system console
output.
Note – If you have not set OpenBoot configuration variables properly, no console
output will appear. For instructions, see “How to Redirect the System Console to the
System Controller” on page 159.
What Next
If you plan to use RSC software to control the Sun Fire V490 server, you may want to
configure additional RSC user accounts.
If you want to try the system controller command-line interface, you can use the
telnet command to connect directly to the RSC card using the device’s name or IP
address. When the rsc> prompt appears, type help to get a list of available
commands.
Open Console icon
System Console window