Filter
Top Products
Chapter 10 Isolating Failed Parts 169
■ As root, type:
■ At the SC command-line interface, type:
■ From the RSC software’s main GUI screen, click the representation of the
Locator LED.
See the illustration under Step 5 in “How to Monitor the System Using the System
Controller and RSC Software. With each click, the LED will change state from off
to on, or vice versa.
2. Turn the Locator LED off.
Do one of the following:
■ As root, type:
■ At the system console as accessed through the system controller, type:
■ From the RSC software’s main GUI screen, click the representation of the
Locator LED.
See the illustration under Step 5 in “How to Monitor the System Using the System
Controller and RSC Software. With each click, the LED will change state from on
to off, or vice versa.
# /usr/sbin/locator -n
rsc> setlocator on
# /usr/sbin/locator -f
rsc> setlocator off