Filter
Top Products
Dimension ES-2008 Ethernet Switch
15-2 Switch Configuration
Table 15-1 SMT: Port/Trunk Configuration
FIELD DESCRIPTION
Type
This read-only field displays the type of the port: 10/100TX for Ethernet
ports or 100FX for the fiber port.
Enabled
Press [SPACE BAR] and [ENTER] to select Yes to activate the port.
Auto Negotiation
Press [SPACE BAR] and [ENTER] to select Enabled to activate the
auto negotiation feature on the port.
Speed/Duplex
Config
Press [SPACE BAR] and [ENTER] to select one 10 Half, 10 Full, 100
Half or 100 Full to set the speed and duplex mode of the port.
Flow Control
Press [SPACE BAR] and [ENTER] to select On to activate the flow
control feature on the port.
Group Press [SPACE BAR] and [ENTER] to select a trunk group this port
belongs to. Trunk group choices are Trunk1, Trunk2, Trunk3 and
Trunk4.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
The Type field for port 9 varies depending on your switch model.
15.2 Port Mirroring
The port mirroring feature allows you to monitor port traffic on the switch. Refer to the
Port Mirroring chapter for more information.
Select Port Mirroring Configuration and press [ENTER] to display the screen as shown
next.