Filter
Top Products
Dimension ES-2008 Ethernet Switch
Switch Configuration 15-9
Figure 15-8 SMT: Priority Configuration
The following table describes the fields in this screen.
Table 15-5 SMT: Priority Configuration
FIELD DESCRIPTION
Level 0..7
Press [SPACE BAR] and [ENTER] to select High to set high priority for level.
High/Low
Queue
Service
Ratio H:L
Press [SPACE BAR] and [ENTER] to select the type of queue service. Refer
to the Advanced Switch Configuration chapter for descriptions of each option.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
15.5 MAC Address Configuration
Use the menus in the MAC Address Configuration screen to set static MAC addresses
and configure MAC address filter.
In the Switch Configuration screen, select MAC Address Configuration to display the
screen as shown.
Dimension Switch ES-2008 : Priority Configuration
========================
Level 0 : Low
Level 1 : Low
Level 2 : Low
Level 3 : Low
Level 4 : High
Level 5 : High
Level 6 : High
Level 7 : High
High/Low Queue Service Ratio H:L :[H->L]
actions-> <Edit> <Save> <Quit>
Select the action menu.
Tab=Next Item BackS
p
ace=Previous Item
Q
uit=Previous menu Enter=Select Item