Filter
Top Products
Dimension ES-2008 Ethernet Switch
Basic System Setup 14-1
Chapter 14
Basic System Setup
This chapter shows you how to set up the switch for administrative purposes.
14.1 Introduction
Use the menus in the Switch Configurations screen to configure the switch.
In the main menu, press [TAB] to select Switch Configuration and press [ENTER] to
display the Switch Configuration menu as shown next.
Figure 14-1 SMT: Switch Configuration
The following table describes each submenu in this screen.
Table 14-1 Switch Configuration Menu Choice
SUBMENU DESCRIPTION
Administration
Configuration
Use this menu to set the system name, IP address and
password
Port/Trunk Configuration Use this menu to configure and display port settings and set
up trunk groups.
Dimension Switch ES-2008 : Switch Configuration
========================
Administration Configuration
Port/Trunk Configuration
Port Mirroring Configuration
VLAN Configuration
Priority Configuration
MAC Address Configuration
Misc Configuration
Main Menu
Configure the system,IP,and password.
Tab=Next Item BackSpace=Previous Item Enter=Select Item