Filter
Top Products
Dimension ES-2008 Ethernet Switch
F Setting Up Your Computer’s IP Address
6
.
-If you do not know your gateway's
IP address, remove any previously
installed gateways in the IP Settings
tab and click OK.
Do one or more of the following if
you want to configure additional IP
addresses:
-In the IP Settings tab, in IP
addresses, click Add.
-In TCP/IP Address, type an IP
address in IP address and a subnet
mask in Subnet mask, and then
click Add.
-Repeat the above two steps for
each IP address you want to add.
-Configure additional default
gateways in the IP Settings tab by
clicking Add in Default gateways.
-In TCP/IP Gateway Address, type
the IP address of the default
gateway in Gateway. To manually
configure a default metric (the
number of transmission hops), clear
the Automatic metric check box
and type a metric in Metric.
-Click Add.
-Repeat the previous three steps for each default gateway you want to add.
-Click OK when finished.