Filter
Top Products
Dimension ES-2008 Ethernet Switch
Troubleshooting 19-3
Table 19-5 Troubleshooting Console Port
STEPS CORRECTIVE ACTION
3 Make sure you entered the correct username and password. The default
username is “admin” and the default password is “1234”.
If you have forgot your username or password, refer to Section 19.5.
19.3 Telnet
I cannot telnet into the switch.
Table 19-6 Troubleshooting Telnet
STEPS CORRECTIVE ACTION
1 Make sure you are using the correct IP address of the switch. Check the IP
address of the switch.
2 Ping the switch from your computer.
If you cannot ping the switch, check the IP addresses of the switch and your
computer. Make sure that both IP addresses are in the same subnet.
3 Make sure you entered the correct username and password. The default
username is “admin” and the default password is “1234”.
If you have forgot your username or password, refer to Section 19.5.
4 If these steps fail to correct the problem, contact the distributor.
19.4 Web Configurator
I cannot access the web configurator.
Table 19-7 Troubleshooting Web Configurator
STEPS CORRECTIVE ACTION
1 Make sure you are using the correct IP address of the switch. Check the IP
address of the switch.
2 Make sure you entered the correct username and password. The default
username is “admin” and the default password is “1234”.
If you have forgot your username or password, refer to Section 19.5.
3 Ping the switch from your computer.
If you cannot ping the switch, check the IP addresses of the switch and your
computer. Make sure that both IP addresses are in the same subnet.