Filter
Top Products
Dimension ES-2008 Ethernet Switch
Switch Configuration 15-3
Figure 15-2 SMT: Port Monitoring Configuration
The Type field for port 9 varies depending on your switch model.
Follow the instructions in the table next to configure the fields in this screen.
Table 15-2 SMT: Port Monitoring Configuration
FIELD DESCRIPTION
Port Mirror
State
Press [SPACE BAR] and [ENTER] to select YES to activate the port
mirroring feature and set the related fields below.
Analysis Port Press [SPACE BAR] and [ENTER] to select a port number as the mirror
port.
Port This read-only field displays the trunk group number or port numbers for
ports not in a trunk group.
Note: This field is 0 to indicate that a port is in a trunk group.
Type
This read-only field displays either 10/100 TX for Ethernet ports or 100FX
for the fiber port on the switch.
Dimension Switch ES-2008 : Port Mirroring Configuration
========================
Port Mirroring State: Enable
Analysis Port: 1
Port Type Action
------------------------------------------
1. 10/100TX None
2. 10/100TX RX
3. 10/100TX TX
Trk1. 10/100TX Both
Trk2. 10/100TX None
0. 10/100TX None
0. 10/100TX None
0. 10/100TX None
9. 100FX None
actions-> <Quit> <Edit> <Save>
Edit the mirroring configuration.
Tab=Next Item BackS
p
ace=Previous Item S
p
ace=To
gg
le Esc=Action menu