Filter
Top Products
Dimension ES-2008 Ethernet Switch
15-14 Switch Configuration
Select Port Security and press [ENTER] to display the screen as shown next.
Figure 15-15 SMT: Port Security
The following table describes the fields in this screen.
Table 15-7 SMT: Port Security
FIELD DESCRIPTION
Port This read-only field displays the port number or the trunk group on the switch
Note: This field is 0 to indicate that a port is in a trunk group.
Enable
Security
Press [SPACE BAR] and [ENTER] to select Enable to prevent the port from
learning new MAC addresses.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
15.6.2 MAC Address Time Out
To specify the time out period for inactive MAC addresses, select Aging Time Setting to
display the screen as shown next.
Enter a time interval between 300 and 765 (in seconds) in the MAC Age Interval (sec)
field. If you enter 0, the MAC addresses will never timeout.
Dimension Switch ES-2008 : Port Security
========================
Port Enable Security
(disable for MAC Learning)
-------------------------------
1. Disable
2. Disable
3. Disable
4. Disable
Trk1. Disable
Trk2. Disable
0. Disable
0. Disable
9. Disable
actions-> <Edit> <Save> <Quit>
Select the Action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item