Filter
Top Products
Dimension ES-2008 Ethernet Switch
Protocol Related Configuration 16-3
Figure 16-4 SMT: STP Parameters Setup
16.2.3 Configuring STP Parameters Per Port
Use the STP Per Port Setting screen to set up STP parameters for each port on the
switch.
Figure 16-5 SMT: STP Per Port Setting
The following table describes the fields in this screen.
Dimension Switch ES-2008 : STP Parameters Setup
========================
Root Bridge Information Configure Spanning Tree Parameters
------------------------ -----------------------------------
Priority : 32768 Priority (1-65535) : 32768
Mac Address : 00001C01016C
Root Path Cost: 0 Max Age (6-40) : 20
Root Port : Root
Max Age : 20 Hello Time (1-10) : 2
Hello Time : 2
Forward Delay : 15 Forward Delay Time (4-30): 15
actions-> <Edit> <Save> <Quit>
Select the action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item
Dimension Switch ES-2008 : STP Per Port Setting
========================
Port State Path Cost Priority
------------------------------------------------------------
1. Disabled 10 128
2. Forwarding 10 128
3. Disabled 10 128
4. Disabled 10 128
5. Disabled 10 128
6. Disabled 10 128
7. Disabled 10 128
8. Disabled 10 128
9. Disabled 10 128
actions-> <Edit> <Save> <Quit>
Select the Action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item