Filter
Top Products
Dimension ES-2008 Ethernet Switch
Getting to Know Your ES-2008 1-1
Chapter 1
Getting to Know Your ES-2008
The ES-2008 is a multi-port switch that can be used to build high-performance switched
workgroup networks. This switch uses a store-and-forward switching scheme, in which
incoming data frames are first stored in buffer memory and checked for errors before
being forwarded; thus offering minimum delay for high-speed networking. It is the ideal
switch for small-to-medium sized enterprise workgroups, departments or backbone
computing environments.
The embedded web configurator makes managing and configuring the ES-2008 easy,
enabling system management as well as individual port control and monitoring.
In addition, the ES-2008 can be managed via Telnet, the console port, or SNMP.
1.1 Features
Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Standards
IEEE802.3ab Gigabit copper for ES models with a gigabit port.
8 auto-negotiating (100M Full/half-duplex, or 10M Full/half-duplex mode)
Ethernet RJ-45 ports
Auto MDI/MDIX (auto-sensing) Ethernet ports
One fixed 100Mbps Fiber (SC/SC single- mode) or gigabit port (not
available on all switch models)
One console port for local configuration
Full duplex and half duplex mode flow control
Store-and-Forward switching scheme
2 megabits memory buffer
Automatic MAC address learning; MAC address table can contain up to
8,000 entries
Performs non-blocking full wire speed (switch fabric bandwidth 3.8 Gbps)
switching
PWR, 100M, LK/ACT and FD/COL LEDs
Ten-inch desktop size design
1.2 Management Features
Web-based management
SNMP network management