Filter
Top Products
Dimension ES-2008 Ethernet Switch
8-8 Filter and Security Setup
Figure 8-7 Port Security
Step 3. Select the check box beside the port number to stop the port from learning
new MAC addresses.
Step 4. Click Apply.
Step 5. Follow Section 8.2.1 to define static MAC addresses on the ports to allow only
the computers with the static MAC addresses to send packets through the
ports
If you do not configure static MAC address(es) on the port with
port security feature, the port will drop all packets.
8.4 MAC Address Filtering
You can set up the switch to drop packets from a computer based on the computer’s MAC
address. Follow the steps set up MAC address filtering.
Step 1. Click Administrator, Filter Setup and then the MAC Filtering tab.