Filter
Top Products
Dimension ES-2008 Ethernet Switch
6-2 Port Control
Table 6-1 Port Configuration
FIELD DESCRIPTION
Auto
Negotiation
Select Enable from the drop-down list box to have the port detect the
speed of incoming transmission and adjust appropriately without manual
intervention.
Speed Select from the drop-down list box to set the transmission speed of the
port. Choices are 10 Mbps and 100 Mbps.
All ports are set to 100 Mbps by default.
Duplex
Select either Full or Half from the drop-down list box to set the duplex
mode of the port.
All ports are set to Full duplex mode by default.
Flow Control
Select Enable from the drop-down list box to activate flow control on this
port.
6.2 View Port Status
The bottom half of the Port Configuration screen displays status of all ports on the
switch.
You may also view the port status information in the Port Status screen
Refer to Table 6-1 for field descriptions. The Config fields display the configured port
settings while the Actual fields displays the real-time status of the port.
6.3 Port Statistics
Click Port Statistics in the menu to display the screen as shown next.