Filter
Top Products
Dimension ES-2008 Ethernet Switch
15-4 Switch Configuration
Table 15-2 SMT: Port Monitoring Configuration
FIELD DESCRIPTION
Action Press [SPACE BAR] and [ENTER] to select direction of data traffic on the
port to monitor.
Select RX to monitor only the incoming traffic on the port.
Select TX to monitor only the outgoing traffic on the port.
Select Both to monitor both the incoming and outgoing traffic on the port.
If this field is None, no traffic on the port is monitored.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
15.3 VLAN
Use the VLAN Configuration screen to configure VLANs.
In the main menu, press [TAB] to select Switch Configuration, VLAN Configuration
and press [ENTER] to display the screen as shown in the figure below.
Figure 15-3 SMT: VLAN Configuration
Refer to the VLAN chapter for more information.
15.3.1 Setting VLAN Mode
In the VLAN Configuration screen, select Configure VLAN Type and press [ENTER]
to display the screen as shown next.
Select Disabled, 802.1Q, 802.1QwithGVRP or Port-Based in the VLAN Mode field.
Dimension Switch ES-2008 : VLAN Configuration
========================
Configure VLAN Type
Create VLAN Group
Edit/Delete VLAN Group
Previous Menu
Configure the VLAN PVID and Ingress Rule.
Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item