Filter
Top Products
Dimension ES-2008 Ethernet Switch
Basic System Setup 14-3
Figure 14-3 SMT: Device Information
To move to the configuration menu, press [TAB] to select <Edit> in the actions menu and
press [ENTER]. The following table describes the fields in this menu.
Table 14-2 SMT: Device Information
FIELD DESCRIPTION EXAMPLE
Device Name Enter a descriptive name for identification purposes. ES-2008
Device Contact Enter the name of the person in charge of this device.
Device Location Enter the location of the switch for administrative
purposes.
2F RM105
Device
Description
Enter a short description of the switch for administrative
purposes.
Ethernet
Switch
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
14.2.2 Ethernet IP Configuration
Use the IP Configuration screen to change the TCP/IP settings of the switch.
Step 1. In the Administration Configuration screen, press [TAB] to select IP
Configuration and press [ENTER].
Dimension Switch ES-2008 : Device Information
========================
Device Name : ES-2008
Device Contact :
Device Location : 2F RM105
Device Description : Ethernet Switch
actions-> <Edit> <Save> <Quit>
Select the action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous menu Enter=Select Item