Filter
Top Products
Changing Configuration for Multiple NICs 113
Boot ROM
To use this option, you must have installed the 3Com
Managed PC Boot Agent (MBA) in the boot ROM socket
on the NIC. (The MBA must be ordered separately. See
installation instructions in the MBA user guide.) When
enabled, the NIC allows the system to access BootWare
residing in the MBA, enabling the PC to boot (with
or without a hard drive) remotely from a LAN server in
TCP/IP, NetWare, and RPL environments. The default setting
is Disabled.
Memory Limit of 1 Megabyte
When disabled (set to No Limit), the MMIO address space
can be mapped above the standard conventional memory
address limit of 1 megabyte.
Changing Configuration for Multiple NICs
If you have more than one 3C359B NIC in your PC, you
must select the NIC you want to configure.
From the DOS Configuration and Diagnostic Program menu
(Figure 27), press Tab to select the Select pull-down menu.
Select the 3C359B NIC you want to configure. Continue
with configuration instructions as described earlier in
this appendix.