Filter
Top Products
Installing a DOS 16-Bit Client Driver 33
2 Restart the PC from DOS, verifying that no network
drivers are loaded.
If you are using DOS version 6.x, press F5 after the
“Starting MS-DOS...” message is displayed as DOS loads.
This prevents any drivers or memory managers from
loading. If you are using an earlier version of DOS, boot
from a DOS diskette that does not contain drivers.
3 If you are using the 3.5-inch diskettes, insert
TokenDisk diskette 1 in the drive and enter:
a:
If you are using the TokenLink Velocity XL CD, insert
it in the CD-ROM drive and enter the drive letter.
For example:
d:
4 Enter:
comslink
A COMSLINK window is displayed.
5 From the COMSLINK Information window, press
Enter.
The first time you use Intelligent Auto Install (COMSLINK),
the 3Com software license appears.
6 To accept the terms and conditions, enter:
y
To view the full text of the license agreement, press F1.
7 When the information window appears, press Enter
to continue.
A status message appears, followed by a prompt for the
ring speed of your network.
8 Enter the ring speed.
9 When the auto installation process is finished,
remove the TokenDisk diskette or TokenLink
Velocity XL CD and restart your PC.
The login prompt for a NetWare server appears.
10 Log in to the NetWare server with your ID and
password.
Your PC is now configured as a NetWare DOS ODI client.