Filter
Top Products
Configuring Class of Service 79
Enabling Class of Service
The Class of Service feature is disabled by default. To
enable Class of Service in a Windows NT 4.0 or
Windows 98 environment, follow these steps:
1 In the Control Panel group, double-click the
3Com Class of Service icon.
The DynamicAccess: Select Adapter window appears
(Figure 16).
The 3Com Class of Service icon is loaded automatically
with the NDIS 5 or NDIS 4 driver installation. In a
Windows NT environment, you can also access the
DynamicAccess: Select Adapter window by clicking the
Priority button on the 3Com TokenLink Velocity XL PCI
Adapter window (Figure 15).
2 Select 3Com TokenLink Velocity XL PCI Adapter, as
shown in Figure 16.
Figure 16 DynamicAccess: Select Adapter Window
3 Click OK.
The Supported Applications tab of the 3Com Class of
Service Setup window appears, as shown in Figure 17.
The Supported Applications tab automatically displays all
applications on your PC that support DynamicAccess Class
of Service.