Filter
Top Products
20 CHAPTER 1: INTRODUCTION
■ CISPR B and FCC B certification for reduced
electromagnetic interference when using either
STP or UTP cables.
■ On-board RJ-45 and DB-9 ports for connecting UTP or
STP cables without using an external media filter.
Installation Overview
This section outlines the major steps for completing a
3C359B NIC installation. It also indicates the sections in
this guide that can help you at each stage.
Follow these steps to successfully install and configure the
3C359B NIC.
1 Insert the 3C359B NIC in a PCI bus master slot in
your PC. Connect the NIC to a compatible network
component using the appropriate cables.
See Chapter 2, “Installing the 3C359B NIC,” for detailed
instructions. Chapter 2 also provides instructions for
installing the Remote Wake-Up cable for PCs equipped to
use this feature.
2 Install the network driver that is appropriate for
your PC’s operating system environment from the
TokenDisk diskettes or from the TokenLink
Velocity XL CD.
Driver installation instructions in this guide are organized by
operating system environment. See the table of contents to
locate the chapter containing the installation instructions
appropriate for your environment.
3 Configure features that are appropriate for your
installation, if necessary. For example:
■ Auto Ring Speed Detection:
Automatically enabled for all drivers, this feature can
be disabled (recommended for servers) if necessary.
■ Class of Service:
Automatically disabled, this feature can be enabled
for the NDIS 5 and NDIS 4 drivers running under
Windows NT or Windows 98.