Filter
Top Products
Installing a 3C359B NIC Driver for Windows Environments 61
7 Remove the TokenDisk diskette or TokenLink
Velocity XL CD and restart your computer.
This concludes the procedure for installing the NDIS 3
driver for Windows 95 (version 950). To confirm successful
installation, see “Verifying Successful Installation” on
page 65.
Installing a Driver for Windows 95 Version 950b, OSR2
Follow these steps to install the driver for Windows 95
version 950b, OSR2. It is assumed that you are already
running Windows 95.
During installation, have the Windows 95 software
accessible on diskettes, CD, or hard drive in case the
installation utility requests files from the Windows 95
software library.
1 Install the 3C359B NIC and start the computer.
Windows 95 detects the new hardware. PCI Token Ring
Controller appears in the New Hardware Found dialog
notice. The Update Device Driver Wizard dialog
box appears.
2 Click Next.
3 Click Other Locations.
The Select Other Location dialog box appears.
4 If you are using 3.5-inch diskettes, insert TokenDisk
diskette 2 in the drive. If you are using the TokenLink
Velocity XL CD, insert it in the CD-ROM drive.
5 At the prompt, enter the appropriate path for the
drive containing your TokenDisk diskette or
TokenLink Velocity XL CD and the driver you want to
install.
■ Use the following path to install the NDIS 4 driver
(recommended) from the TokenDisk diskette:
a:
■ If you are using the TokenLink Velocity XL CD, substitute
the appropriate drive (drive D, for example) and the
DISK_2 designation in the path as follows:
d:\disk_2