Filter
Top Products
50 CHAPTER 3: NOVELL NETWARE ENVIRONMENTS
Max Packet Size = 17954
IO Address Base = EC80
Memory Basic Address = FFDFFC00
IRQ = 11
Select board to bind:2
IPX LAN protocol bound to 3Com 3Com TokenLink
PCI Server MLID FS1:
Once you have determined the values for the NICs installed
in the server, you can use the SLOT= parameter to load the
driver either from the command line or by placing the
LOAD command in the AUTOEXEC.NCF file to load
automatically each time the server is started.
Using the BIND Command After loading the driver,
use the BIND command to bind each NIC to a protocol.
Enter the command from the server console command
prompt, or include the command in the AUTOEXEC.NCF
file to automatically bind the driver when you start the
SERVER program.
bind {ipx | ip} [to] <name | drivername>
{net=<number> | addr=<number>}
IPX | IP The name of the protocol to which you are
binding the driver (IPX or IP). If you specify IP, other
parameters are required; consult your TCP/IP
documentation for more information.
NAME (Optional.) The name you assigned to the logical
board with the Load command. If you use a logical board
name, do not specify DRIVERNAME.
DRIVERNAME The name of the driver you are using. Do
not use DRIVERNAME if you assigned a logical board name
with the NAME parameter.
NET=<number> (IPX protocol only.) The unique IPX
internal network number you have assigned to this
network. It is a hexadecimal number up to eight
characters long. For example:
net=5A