Filter
Top Products
Installing an OS/2 Client Driver for NetWare 41
9 Select CONTINUE.
A new menu appears with three optional protocols:
■ SPX Support for OS/2 Sessions
■ NetBIOS Emulation for OS/2 Sessions
■ Remote Named Pipe Support
10 Select the appropriate protocol and save the
configuration.
If no additional protocols are needed, do not select any
of the three options. Bypass this section by choosing Save
the configuration.
A new menu appears, asking if you want to save changes
to the CONFIG.SYS file.
11 Save the file as C:\CONFIG.SYS and click OK
to continue.
A new window appears, confirming that you want all files
copied to C:\NETWARE.
12 Click COPY and follow the displayed instructions.
Continue the installation and insert the appropriate OS/2
Requester diskettes when prompted.
After the OS/2 Utility diskette is installed, a window
appears that requests information about the ODI LAN
drivers. The default ODI LAN driver is TLNKPODI.SYS.
13 Insert TokenDisk diskette 1 or the TokenLink
Velocity XL CD in the appropriate drive.
14 Select Copy Only the Default Driver and click OK.
If you inserted the TokenLink Velocity XL CD at step 13, you
must specify the location of TLNKPODI.SYS as follows:
d:\disk_1
15 Follow the displayed installation instructions and
insert the appropriate OS/2 Requester diskettes
when prompted.
When the installation is complete, a menu appears with the
following menu bar items:
■ Installation
■ Configuration
■ Utilities