Filter
Top Products
Selecting Ring Speed 69
The default setting for Ring Speed is Auto.
5 To manually set the ring speed, select Ring Speed in
the Property list.
6 Position the mouse pointer on the down arrow
button in the Value field. Press and hold down the
left mouse button.
The Advanced tab appears, as shown in Figure 9.
Figure 9 Manually Setting Ring Speed
7 Select one of the following values:
■ 16 — Disables auto ring speed detection and sets NIC
ring speed at 16 Mbps
■ 4 — Disables auto ring speed detection and sets NIC
ring speed at 4 Mbps
■ Auto — Allows NIC to automatically detect ring speed
Your selection overrides the factory setting for the
3C359B NIC and any setting made through the DOS
Configuration and Diagnostic Program.
8 Click OK.