Filter
Top Products
Installation Overview 21
■ Locally Administered Address (LAA):
You can manually define an LAA that overrides the
NIC’s universal address encoded during manufacturing.
See feature configuration instructions in the chapter for
your operating system environment.
4 Run diagnostics, if necessary.
If you experience problems during the installation process,
you can check the configuration setup and test for physical
NIC problems by running the DOS Configuration and
Diagnostic Program, located on TokenDisk diskette 1 or in
the \DISK_1 directory on the TokenLink Velocity XL CD.
See Chapter 6, “Troubleshooting,” for instructions on
using the Configuration and Diagnostic Program. This
chapter also describes how to isolate and solve various
hardware and network cabling problems.