Filter
Top Products
Installing a Driver for Various IBM Environments 91
9 In the Protocols list box, select the protocols used by
your network application. Select each protocol and
click ADD.
If you are not sure which protocols to use, select IBM
IEEE 802.2 and IBM OS/2 NetBIOS protocol drivers or ask
your network administrator.
The protocol drivers you have selected will appear under
the NIC driver name in the Current Configuration list box.
You can edit parameter settings for the protocols. Select a
protocol and then click Edit.
10 When you have finished selecting and editing
protocols in the Configuration panel, click OK.
11 Click Close in the Configuration panel.
12 Click Exit in the MPTS dialog box.
13 Click Exit in the Update CONFIG.SYS panel to update
the CONFIG.SYS file.
14 When you get the message that the CONFIG.SYS file
has been successfully updated, click OK.
15 Click Exit in the Exiting MPTS panel.
16 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette 1 in the drive.
17 Copy the microcode file TLNKP.MAC from the
TokenDisk to your hard drive.
■ If you are using the 3.5-inch TokenDisk diskettes, enter:
copy a:\tlnkp.mac c:\ibm\macs
■ If you are using the TokenLink Velocity XL CD, substitute
the appropriate drive (drive D, for example) and the
DISK_1 designation in the path as follows:
copy d:\disk_1\tlnkp.mac c:\ibm\macs
18 Shut down OS/2 and restart your computer to let the
changes take effect.
19 At system startup, check for the following conditions
to determine whether the NIC is working correctly
and whether installation has been completed
successfully: