Filter
Top Products
Installing a Driver for Various IBM Environments 89
4 Insert IBM DOS LAN Services diskette 1 in the drive.
5 From the DOS prompt, enter:
a:\install
6 Press Enter when the welcome screen is displayed.
7 Press Enter to accept the default directory C:\NET as
the location to install IBM DOS LAN Services.
8 From the list of network cards presented, select
Network Card Not Shown In List Below.
9 Enter the path of the temporary directory for the
OEMSETUP.INF file:
c:\temp
10 The 3Com TokenLink Velocity XL PCI NIC is selected.
Press Enter.
11 Enter the machine ID, user name, and domain name.
12 Press Enter to accept the list of options chosen.
13 Finish installing files from the IBM DOS LAN Services
diskettes.
14 If you are using the 3.5-inch TokenDisk diskettes,
insert TokenDisk diskette 2 in the drive.
15 Copy the microcode file TLNKP.MAC from the
TokenDisk or TokeLink Velocity XL CD to your hard
drive.
■ If you are using the 3.5-inch TokenDisk diskettes, enter:
copy a:\tlnkp.mac c:\net
■ If you are using the TokeLink Velocity XL CD, substitute
the appropriate drive (drive D, for example) and the
DISK_2 designation in the path as follows:
copy d:\disk_2\tlnkp.mac c:\net
This completes the driver installation for IBM DOS LAN
Services. Restart your computer and install your host
connectivity application.