Filter
Top Products
Installing a NetWare Server Driver 43
The driver and associated files are located in the
\NETWARE\NWSERVER directory on TokenDisk diskette 2,
or in the \DISK_2\NETWARE\NWSERVER directory on the
TokenLink Velocity XL CD.
Driver Support
The TLNKPODI server driver is a high-performance
NetWare 4.1x-compliant server driver. It can be used in
the following environments:
■ NetWare 5.0 servers
■ NetWare 4.1x servers
■ NetWare 3.12 servers
■ NetWare servers running SFT III in NetWare 4.1 (as an
IPX link, not as a mirrored server link)
The term “NetWare 4.1x-compliant” server driver in this file
means that the HSM (hardware-specific module, or server
driver) meets the Open Data-Link Interface (ODI) 3.3
specification. Netware 3.12 servers using ODI 3.3 drivers
need updated files from Novell. If you are installing the
driver in a NetWare 3.12 server, download the LANDR9
and 312PTA.EXE files from Novell’s Web site.
Installation Instructions
This section has instructions for installing TLNKPODI in
three ways:
■ On a file server in an existing NetWare environment
running NetWare 3.12 or 4.1x. These instructions also
apply to a new installation or upgrade to NetWare 3.12.
■ As part of a new NetWare 4.1x installation or an
upgrade to NetWare 4.1x.
■ As part of an upgrade to NetWare 5.0.
Instructions in this section are written for TokenDisk
diskettes. If you are using the TokenLink Velocity XL CD,
substitute the appropriate path (using the \DISK_2
designation at the start of the path) where required.