Filter
Top Products
92 CHAPTER 5: IBM ENVIRONMENTS
■ The device driver files loaded successfully. There are
no error messages.
■ You are able to log on and communicate with
the network.
If you experience problems, see Chapter 6,
“Troubleshooting.”
Installation of the driver for OS/2 is now complete.
Configuring IBM Host Connectivity
This section describes the initial phase of configuring
3C359B NIC connectivity to an IBM host computer
(mainframe or AS/400) for various Windows environments.
This phase involves adding the appropriate network
protocol to enable host connectivity.
After adding the network protocol, install the host
connectivity applications (such as client access and
emulator applications) that are appropriate for your
environment.
Adding the MS-DLC Network Protocol for
Windows for Workgroups
Follow the steps in this section to add the Microsoft MS-DLC
network protocol to the Windows for Workgroups Add
Network Protocol list for the 3C359B NIC. The MS-DLC
protocol is required for connectivity between your PC and an
IBM host computer.
Before proceeding, make sure that you have the Microsoft
MS-DLC network protocol available. If the MS-DLC
protocol is not currently available, download it from the
Microsoft Web site to a temporary storage location on your
PC’s hard disk or on a diskette.
1 In the Windows for Workgroups Program Manager
window, double-click the Network icon.
2 In the Network window, double-click the Network
Setup icon.
3 In the Network Setup window, click Network Drivers.