Filter
Top Products
52 CHAPTER 3: NOVELL NETWARE ENVIRONMENTS
4 Press Alt+Esc to return to the Install program.
5 Press Insert to load an unlisted LAN driver, and then
follow the prompts to specify the driver load path.
6 At the next menu, enter the following path:
a:\netware\nwserver\41x_5.0
After a short delay, a menu appears, showing the
TLNKPODI.LAN driver.
7 Press Enter to select the TLNKPODI.LAN driver.
8 When asked if you want to copy the driver (to
SYS:SYSTEM), respond Yes.
The next menu shows the parameters that can be used
with the 3C359B token ring NIC driver.
9 Press Enter to view a list of supported options for the
selected parameter.
Additional help for the parameter is also displayed in the
lower text box. You can also find a description of
parameters and explanations earlier in this chapter in
“Using the LOAD Command.”
10 After you have made selections for all 3C359B NIC
driver parameters, press F10 to save the parameters
and load TLNKPODI.LAN. Then follow the prompts to
complete the server installation.
11 After completing the installation, copy the support
modules MSM.NLM and TOKENTSM.NLM from
TokenDisk diskette 2 to the server’s SYS:SYSTEM
directory.
Doing so causes the support modules to be auto-loaded
by any of the server drivers, such as TLNKPODI.LAN. See
“Copying Support Modules and the Driver to the
File Server” earlier in this chapter for instructions.
Installing the Driver as an Upgrade to NetWare 5.0
This section has instructions for loading TLNKPODI.LAN as
part of an upgrade to NetWare 5.0. The procedure shows
the essential steps for upgrading the server driver only. For
most upgrades, other steps will be required; consult your
Novell documentation for information about any
procedures not described below.