Filter
Top Products
Configuring IBM Host Connectivity 93
4 In the Network Drivers window, make sure that 3Com
TokenLink Velocity XL PCI Adapter is displayed. Click
Add Protocol.
5 In the Add Network Protocol window, select Unlisted
or Updated Protocol. Click OK.
6 In the Install Driver window, enter the path for the
MS-DLC protocol. If the protocol is stored on diskette,
insert the diskette in the drive. Click OK.
7 In the Unlisted or Updated Protocol window, select
MS-DLC. Click OK.
The Network Driver window is displayed.
8 Verify that the MS-DLC protocol is displayed under
3Com TokenLink Velocity XL PCI Adapter. Click Close.
The Network Setup window is displayed.
9 Click OK.
The MS-DLC files are copied, and the Network
Setup window displays a message indicating that the
AUTOEXEC.BAT, SYSTEM.INI, and PROTOCOL.INI files
have been modified.
10 In the Network Setup message window, click OK.
The Windows Setup window displays the following
message:
You need to quit Windows and restart your
computer so that changes you made will take
effect. Do not press CTRL+ALT+DEL to restart
your computer--this may cause you to lose work.
Restart the computer now?
11 In the Windows Setup message window, click
Restart Computer.
This completes the procedure for adding the Microsoft
MS-DLC network protocol to the Windows for Workgroups
Add Network Protocol list for the 3C359B NIC.
After adding the network protocol, install the host
connectivity applications (such as client access and
emulator applications) that are appropriate for your
environment.