Filter
Top Products
42 CHAPTER 3: NOVELL NETWARE ENVIRONMENTS
■ Readme
■ Help
A message is displayed, stating that the installation process
is complete. Follow the instructions, and continue with
configuration steps in the following section.
Configuring the Novell OS/2 Requester
When you have followed the displayed instructions at
the end of the Novell OS/2 Requester installation process,
a message appears concerning certain configuration
requirements.
After reading the message regarding configuration
requirements, follow these steps:
1 Click the Configuration menu bar item and select
“This Workstation...” to check the NET.CFG file for
the proper NIC configuration.
2 Verify the link driver header, node address, and
frame type.
Your NET.CFG file should look similar to the following:
LINK DRIVER TLNKPODI
Node Address 00608C112233
Frame Token-Ring MSB
Frame Token-Ring_SNAP MSB
The node address should be set to the UAA or the LAA.
Modify and save the NET.CFG file if the node address and
frame type are not correct.
3 Remove the OS/2 Requester diskette and restart
the PC.
This completes the procedure for installing the OS/2 client
driver for NetWare.
Installing a NetWare Server Driver
This section contains information about installing the
TLNKPODI.LAN NetWare server driver for the 3C359B NIC
in the following environments:
■ NetWare 3.12
■ NetWare 4.1x
■ NetWare 5.0