Filter
Top Products
Configuration 35
If RF Planning does not fit your requirements now, you can always use the
RF Planning technique in the future when you have the need, the time,
and the necessary floor plans available. You also can leverage the data in
RF Auto-Tuning and convert these RF measurements to configured
baseline values for planning.
Configuration This section describes the main areas of the 3Com network (WX switch
and MAPs) you will configure in 3WXM. It provides you with overview
information about the software so that you can plan a configuration to
support the services you require.
You will configure the wireless configuration and AAA security
configuration for each service you provide on your wireless network. You
also create a basic configuration for the WX switch.
Figure 6 Configuration Required for Each Service
Do I need to locate rogue APs? RF Planning or RF
Auto-Tuning with
Modelling
RF Auto-Tuning
Do I want to better monitor my
wireless network in terms of
buildings, floors, or coverage
areas?
RF Planning or RF
Auto-Tuning with
Modelling
RF Auto-Tuning
Table 7 Planning Techniques to Use
Concern If yes, use If No, use
Wireless Service
AAA Security Configuration
- AAA methods
- Rules
- Authentication choices
Wireless Configuration
- Radio Profile
- Service Profile
- Encryption Choices