Filter
Top Products
Configure Employee Access Services 65
4 From the 802.1X Policy tab, select Enabled and Pass-Through as the
EAP Type.
This option uses the RADIUS servers to perform all the EAP and AAA
processing. An EAP certificate does not need to be installed on the WX
switch.
5 Click Finish.
You can also create an offload configuration. An offload configuration
allows a WX switch to offload some of the work from the RADIUS
servers. The WX switch will perform EAP processing on behalf of the
RADIUS servers. If you use an offload option, you will need to use the CLI
to generate or install an EAP certificate on the WX switch. To specify an
offload configuration, select PEAP as the EAP Type, and MSCHAPV2 as
the EAP Sub-Protocol.