Filter
Top Products
Create a Radio Profile and Map the Service Profile to It 95
2 Click Wireless. Click Service Profile and select New Service Profile.
3 Enter the name and SSID for the service profile, and the type of
encryption.
4 Select whether you want to Beacon (advertise) this SSID.
5 Select the type of Fall Through Authentication. Select None for no
authentication, Web Portal for web authentication, or Last Resort.
Authentication is attempted in the following order: 802.1X
authentication, MAC authentication, then fall through authentication.
For more information about authentication, see “AAA Security
Configuration” on page 38.
6 Click Finish.
The service profile you created is displayed in the center of the Modify
Switch wizard.
Create a Radio
Profile and Map the
Service Profile to It
To create a radio profile and map a service profile to it:
1 Right-click the WX switch you added, and select Edit.
The Modify Switch wizard is displayed.
2 Click Wireless at the top of the wizard. Select Radio Profile on the left
side; then click New Radio Profile on the right side. The Create Radio
Profile wizard is displayed.
3 Enter the name of the radio profile.
4 Click the Auto-Tune tab. Tune Channel is enabled by default. Select
Tune Transmit Power.