Filter
Top Products
Configure Guest Access Services 71
Step Summary The following list summarizes the fields selected or configuration items
entered configure Guest access.
1 Create a service profile.
From the Service Profile wizard, enter “GuestsSrvcProf” as the Name
of the service profile and “Guests” as the SSID.
Select SSID Type Clear. Select Beacon. Select the Fall Through
Authentication as “Web Portal”.
2 Create a radio profile.
From the Radio Profile wizard, enter the name of the radio profile.
Select Service Profile Selection. Select the Guests service profile.
Click Add. Click Finish.
“Set Up VLANs
on WX
Switches” on
page 66
Expand the WX switch icon in the
Organizer panel, right-click VLANs >
Insert > VLAN
Setup guest VLAN on an WX switch that can access the
external DMZ subnet.
1 From VLAN Setup tab:
VLAN ID: select number (must be unique)
VLAN Name: enter name (must be unique)
IP Address: enter IP Address
2 From VLAN Member Selection tab:
Available Members: select port(s) that connect to the
DMZ; click Add
3 From Spanning Tree tab:
Select STP options
4 From Spanning Tree Port Setup tab:
Select STP port options
Click Finish
“Optional:
Configure
Mobility Profiles”
on page 73
Expand the WX switch icon in the
Organizer panel, right-click on a WX
switch; select Edit. Click AAA >
Mobility Profile.
1 Click New Mobility Profile:
Enter a Profile Name
Enter: selected
Select the Ports or Distributed MAPs
Click Finish
Table 11 Creating a Service for Guest Access
Task Path Primary Parameters to Configure