Filter
Top Products
SNC 5100
102 Setting the Time and Date
6-00020-02
For more information, see the "tzSet “timezone”" command on
page 183.
Example:
SN60023> tzSet “EST”
TZ Set TIMEZONE = EST:EDT:300:040202:101502
value=0=0x0
SN60023 >
Step 4. Use the date command to confirm.
For more information, see the "date" command on page 115.
Example:
SN60023 > date
SN60023 > FRI JAN 26 9:30:49 2001
SN60023 >
Caution
Use 24 hour time when programming the real time clock.
Caution
The time will be 1 hour off while Daylight Savings time is in effect.
Adding a Host System Running Timeserver
Step 1. To enable the timeserver functionality use the setNettime
command.
For more information, see the
"setNettime [value]" command
on page 163.
Example:
SN60023 > setNettime 1
Nettime 1 value=0=0x0
SN60023 >
Step 2. Add a Host running timeserver to the SNC 5100 using the
setTimeHost command.