Filter
Top Products
SNC 5100
4 Environmental Notices and Statements
6-00020-02
General Restrictions
The classification is valid only if the module is operated within the specified
temperature and voltage limits. The system using the module must provide
power supply protection that guarantees that the system power source will
cease to provide power if the maximum recommended operation limit or more
is detected on the +3.3 V/+5 V at the power source. The operating temperature
of the module must be in the temperature range given in the recommended
operating limits. These limits guarantee the laser safety.
Usage Restrictions
The optical ports of the modules must be terminated with an optical connector
or with a dust plug.
Regulatory Notices
Electronic Emission Statements
This section gives the electronic emission notices or statements for the United
States and other countries.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.