Filter
Top Products
Bootrom Messages 207
6-00020-02
SNC 5100
csSrvcInit
SN600030
Clock set from RTC
value=0=0x0
amemInit
SDRAM DIMM: 128 Meg - 1 banks detected
value=0=0x0
appInit
Final Startup Messages
In the final stage of the boot process, information is displayed about the
firmware version, SNC 5100 name, optional features that are enabled or
disabled, SCSI Channels, and the IP address. In the example below, after the
SNC 5100 command prompt, a message is displayed as a result of a response
from a host that is running the Host Registration Service for Scalar Firewall
Manager access control.
SFM Disabled, License is Invalid
Data Mover Enabled, License is Valid
SAN Management Disabled, License is Invalid
VPM Disabled, License is Invalid
USCSI4-LVDTerm Enabled
USCSI3-LVDTerm Enabled
USCSI2-LVDTerm Enabled
USCSI1-LVDTerm Enabled
SN600030
value = 28051936 = 0x1ac09e0
Done executing startup script /ffs/sna.rc
SN600030 >